Aller au menu Aller au contenu Aller à la recherche
  • Français
  • English
  • Français
  • English

Fiche de : PLANCHE Marie-Pierre

Département :
Procédés Métallurgiques, Durabilité, Matériaux


Fonction : Professeur des universités Département Ergonomie Design et Ingénierie Mécanique Laboratoire ICB - PMDM - LERMPS

Localisation :

SS303

Batiment LERMPS

Site de Sevenans

Tél. : +33 (0)3 84 58 32 00
E-mail : marie-pierre.planche@utbm.fr

2009      HDR, Laboratoire LERMPS, UTBM

2000       Maître Conférences,  Université de Technologie Belfort Montbeliard (UTBM)

1995/96  Post- Doc, Plasma spray process characterization and control,  Université de Minnesota

1992/95 Doctorat, Contribution à l’étude des fluctuations dans une torche à plasma. Application à la dynamique de l’arc et aux mesures de vitesse d’écoulement, Uinversité de Limoges Mention Très honorable avec félicitations du Jury

1992    D.E.A de Matériaux Céramiques et Traitements de Surface, Université de Limoges

Projection sous très basse pression, Projection de suspension, Projection HVOF, Projection Cold spray

Diagnostics et contrôle des jets et des particules

Caractérisation des revêtements thermoélectriques, des revêtements résistants à la cavitation, Barrières thermiques, revêtements biocompatibles

Intégration de l’intelligence artificielle aux procédés de projection thermique

 

ACL

  • F. Coudert, M. P. Planche, P. Fauchais, “Anode arc attachment in a spray plasma torch”, High Temperature Chemical Processes, 3, (1994), p.639-651
  • F. Coudert, M. P. Planche, “Velocity measurement of D.C. plasma jets based on arc root fluctuations”, in Plasma Chemistry Plasma Processing, 15, (1), (1995), p.47-70
  • F. Coudert, M. P. Planche, P. Fauchais, “Characterization of D.C. plasma torch voltage fluctuations”, in Plasma Chemistry Plasma Processing, 16, (1996), p.211
  • P. Planche, J. F. Coudert, P. Fauchais, ‘Velocity measurements for arc jets produced by a DC spray plasma torches’, in Plasma Chemistry Plasma Processing, 18, (2), (1998), p. 263-273
  • P. Planche, B. Normand, H. Liao, G. Rannou, C.Coddet “Influence of HVOF parameters on in-flight particles characteristics of Inconel 718 and correlation with the electrochemical behavior of the coating”, in Surface and Coatings technology, 157, (2002), p. 247-256
  • P. Planche, R. Bolot, C.Coddet “In-flight Characteristics of Plasma Sprayed Alumina Particles : Measurements, Modeling and Comparison”, in Journal of Thermal Spray Technology, Vol 12, (1), (2003), p.101-111
  • P. Planche, H. Liao, C.Coddet “Relationships between in-flight particle characteristics and coating microstructure with a twin wire arc spray process and different working conditions”, in Surface and Coatings technology, 182, (2004), p.215-226
  • P. Planche, H. Liao, B. Normand, C.Coddet “Relationships between NiCrBSi particle characteristics and corresponding coating properties using different thermal spraying processes”, in Surface and Coatings technology, Vol 200, (7), (2005), p.2465-2473
  • Moulla, Z. Sahli, M.P. Planche, C.Coddet, “Influence of reflected radiations of high velocity oxy fuel spraying torch on long wavelength IR temperature measurement”, Infrared Physics and Technology, Vol 48 (2), (2006), p. 83-88
  • H Li, S. Costil, H. Liao, C. Li, M.P. Planche, C. Coddet “ Effects of surface conditions on the flattening behaviour of plasma sprayed Cu splats”, in Surface and Coatings Technology, Vol 200, (18-19), (2006), p. 5435-5446
  • F. Kanta, G. Montavon, M.P. Planche, C. Coddet, “Plasma spray process on-line control by artificial intelligence methodology”, Advanced Engineering Materials, Vol 9 (1-2), (2007), p.105-113
  • P. Planche, H. Liao, C. Coddet “Oxidation control in atmospheric plasma spraying coating”, in Surface and Coatings Technology, Vol 202, (2007), p. 69-76
  • F. Kanta, G. Montavon, M.P. Planche and C. Coddet, “Fuzzy logic analysis of alumina-titania deposition yield during APS processing”, Journal of Thermal Spray Technology, Vol 16 (5-6), (2007), p.913-918
  • Bolot, M. P. Planche, H. Liao, C. Coddet, “A 3D Model of the Wire Arc Spray Process and its Experimental Validation”, Journal of Materials Processing Technology, Vol 200, (2008), p. 94-105
  • F. Kanta, G. Montavon, M. Vardelle, M. P. Planche, C. C. Berndt, C. Coddet, “Artificial Neural Networks Vs fuzzy logic: Simple tools to predict and control complex processes – Application to plasma spray processes”, Journal of Thermal Spray Technology,Vol 17, (2008), p.365-376
  • F. Kanta, G. Montavon, M. P. Planche and C. Coddet, “Artificial intelligence computation to establish relationships between APS process parameters and alumina-titania coating properties”, Journal Plasma Chemistry and Plasma Process, Vol 28, (2008), p.249-262
  • Poirier, M. P. Planche, O. Landemarre, C. Coddet “Specificity of glass in thermal spraying : formation of splats”, Journal of Thermal Spray Technology, Vol 17, (4), (2008), p. 564-573
  • Zhang, C.-J. Li, H. Liao, M. Planche, W. Gao, C.-X. Li, C. Coddet, “Effect of in-flight particle velocity on the performance of plasma-sprayed YSZ electrolyte coating”, Journal of Surface Coatings Technology, Vol 202 (12), (2008), p. 2654-2660
  • -F. Kanta, G. Montavon, M.-P. Planche, C. Coddet “In-Flight Particle Characteristics Control by Implementing Fuzzy Logic controller”, Journal of Surface Coatings Technology, Vol 202, (2008), p. 4479-4482
  • Zhang, W.Y. Li, M. P. Planche, C. X. Li, H. Liao, C. J. Li, C. Coddet, “Study on gas permeation behaviour through atmospheric plasma-sprayed yttria stabilized zirconia coating”, Journal of Surface Coatings Technology, Vol 202, (2008), p. 5055-5061
  • Allimant, M. P. Planche, L. Dembinski, C. Coddet, “Progress of the gas atomization of liquid metals by means of a de Laval nozzle”, Journal of Powder Technology, Vol 190, (2009), p.79-83
  • -F. Kanta, G. Montavon, M.P. Planche, C. Coddet, “Artificial Neural Networks implementation in plasma spray process : Prediction of power parameters and in-flight particle characteristics vs desired coating structural attributes”, Journal of Surface Coatings Technology, Vol 203, (2009), p. 3361-3369
  • Zhang, A.-F. Kanta, C.-X. Li, C.-J. Li, M.-P. Planche, H. Liao, C. Coddet, “Effect of in-flight particle characteristics on the coating properties of atmospheric plasma sprayed 8 mol% Y2O3-ZrO2 electrolyte coating studying by artificial neural networks, Journal of Surface Coatings Technology, Vol 204, (2009), p.463-469
  • Allimant, M. P. Planche, Y. Bailly, L. Girardot, L. Dembinski, C. Coddet, “Evolution of the particle diameters and particle velocities during a liquid metal atomization”, Journal of Flow Visualization and Image Processing, Vol 16,(3), (2009), p. 237-253
  • P. Planche, H. Liao, G. Montavon, C. Coddet, “ Characterization of the wire arc spray process via image analysis, in-flight particle characteristics and coating properties” Journal of High Temperature Material Processes, Vol 13, (2009), p.1-23
  • Marchand, E. Saoutieff, P. Bertrand, M.P. Planche, O. Tingaud, G . Bertrand, “ Suspension plasma spraying to manufacture electrodes for solid oxide fuel cell (SOFC) and solid oxide electrolysis cell (SOEC)”, ECS Transactions, Vol 25, 2, (2009), p.585-594
  • Marchand, P. Bertrand, J. Mougin, C. Comminges, M.P. Planche, G . Bertrand, “Characterization of suspension plasma-sprayed solid oxide fuel cell electrodes”, Surface and Coatings Technology, Journal of Surface Coatings Technology, Vol 205 (N°4), (2010), p.993-998
  • Khatim, M.P. Planche, L. Dembinski, Y. Bailly, C. Coddet, “Processing parameter effect on the splat diameters of the droplets produced by liquid metal atomization using De Laval nozzle”, Journal of Surface and Coating Technology, Vol 205 (N°4), (2010), p.1171-1175
  • P. Planche, S. Costil, C. Verdy, C. Coddet, “Different processes for different Al2O3 coating properties”, Journal of Applied Physics A: Materials Science and Processing, Vol 99 (N°3), (2010), p.655-671
  • -F. Kanta, M.-P. Planche, G. Montavon, C. Coddet, “In-flight and Upon Impact Particle Characteristics Modelling in Plasma Spray Process”, Journal of Surface and Coatings Technology, Vol. 204 (N° 8-9), (2010), pp. 1542-1548
  • Zhang, F. Sun, L. Zhu，C. Verdy, M. P. Planche ,H. Liao, C. Coddet “Characteristics of Cu film deposited using VLPPS”, Journal of Thermal Spray technology, Vol 20, 1-2,(2011), p.351-357
  • -F. Kanta, G. Montavon, C. Berndt, M.P. Planche, C. Coddet, “Intelligent system for prediction and control: Application in plasma spray process”, Expert Systems with Applications, Volume 38, Issue 1, (2011), p. 260-271
  • Zhu, N. Zhang, F. Sun, R. Bolot, M. P. Planche, H. Liao, C. Coddet, “Thin Yttria-stabilized Zirconia Coatings Deposited by Low Energy Plasma Spraying under Very Low Pressure Condition”, Journal of Thermal Spray Technology, Volume 20 (5), (2011)
  • Suo, X. Guo, W. Li, M. P. Planche, C. Zhang, H. Liao, “Microstructure and wear behavior of SiCp-reinforced magnesium matrix composite by cold spraying”, Advanced Materials Research, 314-316, (2011), p.253-258
  • Zhu, N. Zhang, F. Sun, R. Bolot, M. P. Planche, H. Liao, C. Coddet, “Very Low Pressure Plasma Sprayed Al2O3 and Yttria-Stabilized Zirconia Thin Dense Coatings using a Modified Transferred Arc Plasma Spraying Torch”, Applied Surface Science, Vol 258, 4, (2011), p. 1422-1428
  • Zhu, N. Zhang, R. Bolot, M. P. Planche, H. Liao, C. Coddet, “Very Low Pressure Plasma Sprayed Yttria-Stabilized Zirconia Coating using a Low Energy Plasma Gun”, Applied Physics A, Materials Science & Processing, on line (2011)
  • Zhang, F. Sun, L. Zhu, C.Verdy, M. P. Planche, H. Liao, C. Dong, C. Coddet, “Electron Temperature and Density of the Plasma Measured by Optical Emission Spectroscopy in VLPPS conditions”, Journal of Thermal Spray Technology, Vol 20, 6, (2011), p.1321-1327
  • -F. Kanta, M.-P. Planche, G. Montavon, “Electrochemical characterisations of Al2O3-13%TiO2 coated by atmospheric plasma spray”, Plasma Chemistry and Plasma Processing, Vol. 31, 6, (2011), p. 867-877
  • Marchand, L. Girardot, M.P. Planche, P. Bertrand, Y. Bailly, G. Bertrand “An insight into suspension plasma spray: injection of the suspension and its interaction with the plasma flow”, Journal of Thermal Spray Technology, Vol. 20, 6, (2011), p.1310-1320
  • Suo, X. Guo, W. Li, M. P. Planche, R. Bolot, H. Liao, C. Coddet , “Preparation and characterization of magnesium coating deposited by cold spraying, Journal of Materials Processing Technology, Vol 212, 1, (2012), p.100-105
  • Zhang, F. Sun, L. Zhu，M. P. Planche, H. Liao, C. Dong, C. Coddet, “ Measurement of specific enthalpy under very low pressure conditions”, Journal of Thermal Spray Technology, Vol 21 (3-4) (2012), p.489-195
  • Suo, X. Guo, W. Li, M.P. Planche, H. Liao, “Investigation of deposition behavior of cold-sprayed magnesium coating, Journal of Thermal Spray Technology, Vol. 21, 5, (2012), p.831-837
  • P. Planche, O. Khatim, L. Dembinski, C. Coddet, L. Girardot, Y. Bailly, “Velocities of Copper droplets in de Laval atomization process”, Journal of Powder Technology, Vol 229, (2012), p.191-198
  • X Suo, M. Yu, W Li, M. P. Planche, H. L. Liao, “Effect of Substrate Preheating on Bonding Strength of Cold-Sprayed Mg Coatings”, Journal of Thermal Spray Technology, Vol.21, 5, (2012), p.1091-1098
  • Suo, X. Guo, M.P. Planche, R. Bolot, H. Liao, C. Coddet, “Cold sprayed magnesium coatings deposited with helium and air”, Rare Metals Materials and Engineering, Vol.41, S1, (2012), p.61-63
  • P. Planche, O. Khatim, L. Dembinski, L. Girardot, Y. Bailly, C. Coddet, “Evaluation of the Splats Properties and Relation with Droplets Diameters in Atomization Process Using a De Laval Nozzle”, Material chemistry and physics, Vol 137, 3, (2013), p. 681-688
  • Suo, T. Liu, W. Li, Q. Suo, M. P. Planche, H. Liao, “Numerical study on the effect of nozzle dimension on particle distribution in cold spraying”, Journal of Surface and Coatings Technology, Vol.220, (2013), p. 107-111
  • Liu, M. P. Planche, A. F. Kanta, S. Deng, G. Montavon, K. Deng and Z. M. Ren, “Plasma Spray Process Operating Parameters Optimization Based on Artificial Intelligence”, Journal of Plasma Chemistry Plasma Processing, (2013), (33), p. 1025-1041
  • Zhang, B. He, Z. Zhang, D. Li, M.P.Planche, C. Coddet, “In-flight particle behavior measured by DPV 2000 system under low pressure condition”, Advanced Materials research 690, (2013), 2063-2066
  • Vautherin, M.P. Planche, R. Bolot, A. Quet, L. Bianchi, G. Montavon, “Vapor and Droplets Mixture Deposition of Metallic Coatings by Very Low Pressure Plasma Spraying”, Journal of Thermal Spray Technology, Vol 23 (4) ,(2014) p. 596-608
  • X. Guo, P. Planche, J. Chen, H. Liao “Relationships between in-flight particle characteristics and properties of HVOF sprayed WC-CoCr coatings”, Materials Processing Technology, Vol 214, (2014), p.456-461
  • Suo, Q. Suo, W. Li, M. P. Planche, H. Liao, “Effects of SiC volume fraction and particle size on the deposition behavior and mechanical properties of cold sprayed AZ91D/SiCp composite coatings”, Journal of Thermal Spray Technology, Vol.23 (1-2), (2014), p. 91-97
  • Vautherin, M.-P. Planche, A. Quet, L. Bianchi, G. Montavon, “Manufacturing of composite titanium-titanium nitride coatings by reactive very low pressure plasma spraying (R-VLPPS),” Journal of Physics: Conference Series, 550(1),012035, (2014)
  • Aubignat, M.P. Planche, A. Allimant, D. Billières, L. Girardot, Y. Bailly, G. Montavon, “Effect of suspension characteristics on in-flight particle properties and coating microstructures achieved by suspension plasma spray”, Journal of Physics: Conference Series, 550(1), 12019-12028, (2014)
  • Zhang, H. Li, P. J. He, M.P. Planche, M. G. Olivier, M. Debliquy, H. Liao, “Microstructure and gas sensing properties of solution precursor plasma-sprayed zinc oxide (ZnO) nanostructured coatings” Materials Research Bulletin,63, (2015) 67-71
  • P. Planche, T. Liu, S. Deng, G. Montavon, “Development of an emulator for the plasma process control” Journal of Mechanics Engineering and Automation, 5(1), (2015), 10-18
  • Suo, S. Yin, M. P. Planche, T.Liu, H. Liao, “Strong effect of carrier gas species on particle velocity during cold spray processes”, Journal of Surface and Coatings, 268, (2015) 90-93
  • Liu, S. Deng, M.-P. Planche, G. Montavon, « Estimating the behavior of particles sprayed by a single-cathode plasma torch based on a nonlinear regressive exogenous model”, Surface and Coatings Technology, 268, (2015) 284-292
  • Vautherin, M.-P. Planche, G. Montavon, F. Lapostolle, A. Quet, L. Bianchi “Study of metallic powder behavior in Very Low Pressure Plasma Spraying (VLPPS) – Application to the manufacturing of titanium-aluminum coatings, Journal of Surface and Coatings, 275, (2015) 341-348
  • Aubignat, M. P. Planche, D. Billieres, A. Allimant, Optimization of the injection with a twin-fluid atomizer for suspension plasma spray process using three non-intrusive diagnostic tools, Journal of Visualization, 19(1), (2016), 21-36
  • Feng, M.P. Planche, S. Deng, H. Liao, H. Rabat, D.Hong “Study of the particle behavior in a pulsed arc”, Journal of Surface and Coatings, 287, (2016), 113-118
  • Huang, W. Li, Z. Zhang, M. Fu, M. P. Planche, H. Liao, G. Montavon, « Modification of a cold sprayed SiCp/Al5056 composite coating by friction stir processing”, Journal of Surface and Coatings, 296, (2016), 69-75
  • Chen, Y. Xie, S. Yin, M.P. Planche, S. Deng, R. Lupoi, H. Liao “Evaluation of the interfacial bonding between particles and substrate in angular cold spray” Materials Letters, 173, (2016), 76-79
  • Liu, R. Bolot, S. Costil, M.P. Planche, “Transient thermal and mechanical analysis of NiCrBSi coatings manufactured by hybrid plasma spray process with in-situ laser remelting”, Journal of Surface and Coatings, 292, (2016), 132-143
  • Xie, M.P. Planche, R. Raoelisson, H.Liao, X. Suo, P.Hervé, “Effect of Substrate Preheating on Adhesive Strength of SS 316L Cold Spray Coatings, ”, Journal of Thermal Spray Technology, Vol.25, 1, (2016), 123-130
  • Raoelison, E. Aubignat, M.P. Planche, S. Costil, C. Langlade, H. Liao “Low pressure cold spraying under 6 bar pressure deposition: exploration of high deposition efficiency solutions using a mathematical modelling”, Journal of Surface and Coatings, 302, (2016), 47-55
  • Xie, S. Yin, C. Chen, M.P Planche, H. Liao, R. Lupoi, “New insights into the coating/substrate interfacial bonding mechanism in cold spray”, Scripta Materalia, 125, (2016), 1-4
  • Wang, J. Liu, N. Kan, G. Darut, T. Poirier, J. Stella, H. liao, M. P. Planche, “Cavitation erosion of plasma-sprayed CoMoCrSi coatings”, Journal of Tribology International, 102, (2016), 429-435
  • Xie, M. P. Planche, R. Raoelison, P. Hervé, X. Suo, P. He, H. Liao, “Investigation on the influence of particle preheating temperature on bonding of cold-sprayed nickel coatings”, Journal of Surface and Coating Technology, 318 (2017), 99-105
  • Huang, W. Li, Y. Xie, M. P. Planche, H. Liao, G. Montavon, “Effect of Substrate Type on Deposition Behavior and Wear Performance of Ni-Coated Graphite/Al Composite Coatings Deposited by Cold Spraying”, Journal of Materials Science and Technology, 33, (2017), 338-346
  • Huang, W. Li, Z. Zhang, M. P. Planche, H. Liao, G. Montavon, “Effect of Tool Rotation Speed on Microstructure and Microhardness of Friction-Stir-Processed Cold-Sprayed SiCp/Al5056 Composite Coating”, Journal of Thermal Spray Technology, 25(7), (2016), 1357-1364
  • Wang, J. Liu, H. Liao, G. Darut, J. Stella, T. Poirier, M.P. Planche, “Influence of preheating processes on the microstructure of laser glazed YSZ coatings”, Journal of Ceramics International, 43(5), (2017), 4606-4611
  • Wang, J. Stella, G. Darut, T. Poirier, H. Liao, M. P. Planche, “APS prepared NiCrBSi-YSZ composite coatings for protection against cavitation erosion“ Journal of alloys and compounds, 699, (2017), 1095-1103
  • Zhang, D. Lin, Y. Li; M. P. Planche, H. Liao, C. coddet, F. Dong, “In-flight particle characterization and coating formation under low pressure plasma spray condition“, Journal of iron and steel research international, 24(3), (2017), 306-312
  • Huang, W. Li, Y. Feng, Y. Xie, M. P. Planche, H. Liao, G. Montavon, “Microstructural evolution and mechanical properties enhancement of a cold-sprayed Cu-Zn alloy coating with friction stir processing“, Journal of Materials characterization, 125, (2017), 76-82
  • Wang, J. Liu, H. Liao, G. Darut, J. Stella, T. Poirier, M.P. Planche, “Influence of Laser Glazing on the Characterization of Plasma-Sprayed YSZ Coatings“, Journal of Thermal spray technology, 26(1-2), (2017), 93-99
  • Feng, M. P. Planche, H.,Liao, C.,Verdy, F.,Bernard, “Microstructure and electric properties of low-pressure plasma sprayed β-FeSi2 based coatings“, Journal of Surface and Coatings Technology, 318, (2017), 3-10
  • Xie, M. P. Planche, R. Raoelisson, P.Herve, X. Suo, P. He, H. Liao, “Investigation on the influence of particle preheating temperature on bonding of cold-sprayed nickel coatings“, Journal of Surface and Coatings Technology, 318, (2017), 99-105
  • Huang, W.,Li, M. P. Planche, H.,Liao, G.,Montavon, “In-situ formation of Ni-Al intermetallics-coated graphite/Al composite in a cold-sprayed coating and its high temperature tribological behaviors“, Journal of Materials Science and Technology, 33, (2017), 507-515
  • Wang, G. Darut, T. Poirier, J. Stella, H. Liao, M.P. Planche, “Cavitation erosion of plasma sprayed YSZ coatings produced by feedstocks with different initial sizes“, Tribology International, 111, (2017), 226-233
  • Wang, G. Darut, T, Poirier, J. Stella, H. Liao, M.P.,Planche, “Ultrasonic cavitation erosion of as-sprayed and laser-remelted yttria stabilized zirconia coatings“, Journal of the European Ceramic Society, 37, (2017), 3623-3630
  • Fan, G. Darut, M. P. Planche, N. Kang, H ; Liao, G. Montavon, “Formation mechanisms of in-situ Al based intermetallic coatings manufactured by very low pressure plasma spraying”, Journal of Surface and Coatings Technology, 334, (2018), 300-304
  • Raoelison, Y. Xie, T. Sapanathan, M. P. Planche, R. Kromer, S. Costil, C. Langlade, “Cold gas dynamic spray technology: a comprehensive review of processing conditions for various technological developments till to date”, Additive Manufacturing, 19 (2018), 134-159
  • Zhao, F. Peyraut, M.P. Planche, J. Ilavsky, H. Liao, A. Lasalle, A. Allimant, G. Montavon, Experiments, statistical analysis and modeling to evaluate the porosity influence in SPS coatings, Journal of thermal spray technology, 2018.
  • Zhao,Y. Wang, Z. Yu, M.P. Planche, F. Peyraut, H. Liao, A. Lasalle, A. Allimant, G. Montavon, Microstructural, mechanical and tribological properties of suspension plasma sprayed YSZ/h-BN composite coating, Journal of the European Ceramic Society, 2018. 38: P. 4512–4522.
  • Zhao, Z.Yu, M.P. Planche, A. Lasalle, A. Allimant, G. Montavon, H. Liao, Influence of Substrate Properties on the Formation of Suspension Plasma Sprayed Coatings, Journal of thermal spray technology, 2018. 27(1): p. 73-83.
  • Huang, X. Yan, W. Li, W.B. Wang, C. Verdy, M.P. Planche, H.L. Liao, G. Montavon, Post-spray modification of cold-sprayed Ni-Ti coatings by high-temperature vacuum annealing and friction stir processing, Applied Surface Science 451, (2018) 56-66
  • Chen, Xinliang Xie,Y. Xie, M.P. Planche, S. Deng, G. Ji, E. Aubry, Z. Ren, H. Liao, Cold spraying of thermally softened Ni-coated FeSiAl composite powder: Microstructure characterization, tribological performance and magnetic property, Materials and Design 160, (2018) 270-283
  • Xie, C.,Chen, M. P. Planche, S.,Deng, H.,Liao, Effect of spray angle on Ni particle deposition behaviour in cold spray, Journal of Surface Engineering, Surface Engineering 34 (5), 352-360 (2018)
  • Huang, K.Yang, N.Li, W.Li, M.P.Planche, C.Verdy, H.Liao, G. Montavon, Microstructures and wear-corrosion performance of vacuum plasma sprayed and cold gas dynamic sprayed Muntz alloy coatings, Journal of Surface and Coatings Technologym in press (2019)
  • Wang, Y. Zhao, G.Darut, T. Poirier, J.Stella, K. Wang,; H. Liao; M.P. Planche, A novel structured suspension plasma sprayed YSZ-PTFE composite coating with tribological performance improvement, Surface and Coatings Technology, 358, 108-113 (2019)
  • Zhao, F. Peyraut, M.P. Planche, J. Illavsky, A. Lasalle, A. Allimant, G. Montavon. Experiments, Statistical Analysis, and Modeling to Evaluate the Porosity Influence in SPS Coatings, Journal of Thermal Spray Technology 28 (Issue 1–2), 76–86 (2019)
  • Fan, G. Darut, M.P Planche, H. Liao, G. Montavon, Characterizations of Composite Titanium Nitride Coatings Deposited by Very Low-Pressure Plasma Spraying, Journal of Thermal Spray Technology 28 (Issue 1–2) 265–272 (2019)
  • Darut, A. Niederhauser, B. Jaccoud, M.P Planche, H Liao, G. Montavon, VLPPS: An Emerging Process to Create Well-Defined Components by Additive Manufacturing, Journal of Thermal Spray Technology 28 (Issue 1–2), 255–26 (2019)

0

 

 

Type de formation Discipline enseignée Département Niveau Nature Responsable Unité de Valeur
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Formation initiale

 Optique Tronc commun 1ère et 2ème année post bac TD, TP

TICE
Thermodynamique Tronc commun 1ère et 2ème année post bac C, TD De 1999 à 2005
Mécanique du point et énergétique Tronc commun 1ère et 2ème année post bac C, TD, TP De 2002 à 2007
Electricité Tronc commun 1ère et 2ème année post bac TD
Mécanique du solide et thermodynamique Tronc commun 2ème année post bac C, TD Depuis 2010
Accompagnement à la conduite d’un raisonnement physique Tronc commun 1ère et 2ème année post bac TD
Electrostatique Génie Mécanique et Conception L (1ère année cycle ingénieur) C, TD De 2004 à 2010
Physique des transferts de chaleur Ergonomie, Design et Conception Mécanique L (1ère année cycle ingénieur) C, TD Depuis 2012
Acoustique et mécanique vibratoire Ergonomie, Design et Conception Mécanique L (1ère année cycle ingénieur) C, Td
Dimensionnement des machines Ergonomie, Design et Conception Mécanique M (3ème année cycle ingénieur) C, TD
Encadrements stages d’ingénieurs et de fin d’étude Génie Mécanique et Conception En raison de 5 à 8 étudiants par année
Formation par alternance Thermique-Thermodynamique Génie Mécanique et Conception L (1ère année cycle ingénieur) C, TD Depuis sa création en 2013
 

 

 

Formation continue

 Stage industriel en Projection thermique Laboratoire LERMPS Effets des principaux paramètres de projection

Interactions environnement et particules en vol

Techniques et systèmes de collecte des gaz,

des particules et des fumées

Contrôles et diagnostic avant et pendant la projection
Fontanet Génie Mécanique et Conception Intervention pour du soutien en physique depuis 2015
Validation des Acquis d’Expériences Génie Mécanique et Conception Audition de recevabilité de 4 candidats

Correction des mémoires (en cours)

Mandats

  • Conseil Administratif de l’UTBM, juin 2016, membre titulaire
  • Conseil Scientifique de l’UTBM (2012-2016), membre titulaire
  • Bureau de Département Génie Mécanique et Conception de l’UTBM (2003-2012), membre titulaire
  • Conseil d’Unité du laboratoire LERMPS (depuis juin 2013), membre titulaire
  • Commission Consultative Paritaire de l’UTBM (2009), membre suppléante
  • Conseil National des Universités (62ème section) (2015), membre titulaire
  • Association Arc Electrique depuis septembre (depuis 2009), membre cooptée et membre du comité scientifique
  • Comité de pilotage du Réseau CNRS « Plasmas Froids » (2006 – 2012), membre titulaire
  • GdR Abioplas (renouvelé en 2014) sur les applications plasma dans le domaine du biomédical (depuis 2011), membre cooptée
  • Directrice du pôle Mobilités et Transports du Futur
  • Coordinatrice des activités de l’UTSEUS (Université de Technologie à Shanghai) pour l’UTBM.
statut_ub:
batiment:
equipe_1:
OCS
fonction_equipe_1:
Agent(e) de service
mots_cles:
adresse:
onglets:
{tab=Carrière} # {tab=Projets} # {tab=Publications} # {tab=Communications} # {tab=Enseignements} # {tab=Administration} # {/tabs}
telephone:
+33 (0)3 84 58 32 00
e-mail:
marie-pierre.planche@utbm.fr
site_web:
departement:
a:1:{i:0;s:51:"Procédés Métallurgiques, Durabilité, Matériaux";}
fonction:
Professeur des universités Département Ergonomie Design et Ingénierie Mécanique Laboratoire ICB - PMDM - LERMPS
localisation:
SS303 Batiment LERMPS Site de Sevenans
texte_onglets:
[tabs] [tab title=Carrière] Tab Content 1 [/tab] [tab title=Projets] Tab Content 2 [/tab] [tab title=Communications] Tab Content 3 [/tab] [tab title=Publications] Tab Content 4 [/tab] [/tabs]
carriere:
2009      HDR, Laboratoire LERMPS, UTBM 2000       Maître Conférences,  Université de Technologie Belfort Montbeliard (UTBM) 1995/96  Post- Doc, Plasma spray process characterization and control,  Université de Minnesota 1992/95 Doctorat, Contribution à l’étude des fluctuations dans une torche à plasma. Application à la dynamique de l’arc et aux mesures de vitesse d’écoulement, Uinversité de Limoges Mention Très honorable avec félicitations du Jury 1992    D.E.A de Matériaux Céramiques et Traitements de Surface, Université de Limoges
projets:
Projection sous très basse pression, Projection de suspension, Projection HVOF, Projection Cold spray Diagnostics et contrôle des jets et des particules Caractérisation des revêtements thermoélectriques, des revêtements résistants à la cavitation, Barrières thermiques, revêtements biocompatibles Intégration de l'intelligence artificielle aux procédés de projection thermique  
communications:
publications:
ACL
  • F. Coudert, M. P. Planche, P. Fauchais, “Anode arc attachment in a spray plasma torch”, High Temperature Chemical Processes, 3, (1994), p.639-651
  • F. Coudert, M. P. Planche, “Velocity measurement of D.C. plasma jets based on arc root fluctuations”, in Plasma Chemistry Plasma Processing, 15, (1), (1995), p.47-70
  • F. Coudert, M. P. Planche, P. Fauchais, “Characterization of D.C. plasma torch voltage fluctuations”, in Plasma Chemistry Plasma Processing, 16, (1996), p.211
  • P. Planche, J. F. Coudert, P. Fauchais, ‘Velocity measurements for arc jets produced by a DC spray plasma torches’, in Plasma Chemistry Plasma Processing, 18, (2), (1998), p. 263-273
  • P. Planche, B. Normand, H. Liao, G. Rannou, C.Coddet “Influence of HVOF parameters on in-flight particles characteristics of Inconel 718 and correlation with the electrochemical behavior of the coating”, in Surface and Coatings technology, 157, (2002), p. 247-256
  • P. Planche, R. Bolot, C.Coddet “In-flight Characteristics of Plasma Sprayed Alumina Particles : Measurements, Modeling and Comparison”, in Journal of Thermal Spray Technology, Vol 12, (1), (2003), p.101-111
  • P. Planche, H. Liao, C.Coddet “Relationships between in-flight particle characteristics and coating microstructure with a twin wire arc spray process and different working conditions”, in Surface and Coatings technology, 182, (2004), p.215-226
  • P. Planche, H. Liao, B. Normand, C.Coddet “Relationships between NiCrBSi particle characteristics and corresponding coating properties using different thermal spraying processes”, in Surface and Coatings technology, Vol 200, (7), (2005), p.2465-2473
  • Moulla, Z. Sahli, M.P. Planche, C.Coddet, “Influence of reflected radiations of high velocity oxy fuel spraying torch on long wavelength IR temperature measurement”, Infrared Physics and Technology, Vol 48 (2), (2006), p. 83-88
  • H Li, S. Costil, H. Liao, C. Li, M.P. Planche, C. Coddet “ Effects of surface conditions on the flattening behaviour of plasma sprayed Cu splats”, in Surface and Coatings Technology, Vol 200, (18-19), (2006), p. 5435-5446
  • F. Kanta, G. Montavon, M.P. Planche, C. Coddet, “Plasma spray process on-line control by artificial intelligence methodology”, Advanced Engineering Materials, Vol 9 (1-2), (2007), p.105-113
  • P. Planche, H. Liao, C. Coddet “Oxidation control in atmospheric plasma spraying coating”, in Surface and Coatings Technology, Vol 202, (2007), p. 69-76
  • F. Kanta, G. Montavon, M.P. Planche and C. Coddet, “Fuzzy logic analysis of alumina-titania deposition yield during APS processing”, Journal of Thermal Spray Technology, Vol 16 (5-6), (2007), p.913-918
  • Bolot, M. P. Planche, H. Liao, C. Coddet, “A 3D Model of the Wire Arc Spray Process and its Experimental Validation”, Journal of Materials Processing Technology, Vol 200, (2008), p. 94-105
  • F. Kanta, G. Montavon, M. Vardelle, M. P. Planche, C. C. Berndt, C. Coddet, “Artificial Neural Networks Vs fuzzy logic: Simple tools to predict and control complex processes – Application to plasma spray processes”, Journal of Thermal Spray Technology,Vol 17, (2008), p.365-376
  • F. Kanta, G. Montavon, M. P. Planche and C. Coddet, “Artificial intelligence computation to establish relationships between APS process parameters and alumina-titania coating properties”, Journal Plasma Chemistry and Plasma Process, Vol 28, (2008), p.249-262
  • Poirier, M. P. Planche, O. Landemarre, C. Coddet “Specificity of glass in thermal spraying : formation of splats”, Journal of Thermal Spray Technology, Vol 17, (4), (2008), p. 564-573
  • Zhang, C.-J. Li, H. Liao, M. Planche, W. Gao, C.-X. Li, C. Coddet, “Effect of in-flight particle velocity on the performance of plasma-sprayed YSZ electrolyte coating”, Journal of Surface Coatings Technology, Vol 202 (12), (2008), p. 2654-2660
  • -F. Kanta, G. Montavon, M.-P. Planche, C. Coddet “In-Flight Particle Characteristics Control by Implementing Fuzzy Logic controller”, Journal of Surface Coatings Technology, Vol 202, (2008), p. 4479-4482
  • Zhang, W.Y. Li, M. P. Planche, C. X. Li, H. Liao, C. J. Li, C. Coddet, “Study on gas permeation behaviour through atmospheric plasma-sprayed yttria stabilized zirconia coating”, Journal of Surface Coatings Technology, Vol 202, (2008), p. 5055-5061
  • Allimant, M. P. Planche, L. Dembinski, C. Coddet, “Progress of the gas atomization of liquid metals by means of a de Laval nozzle”, Journal of Powder Technology, Vol 190, (2009), p.79-83
  • -F. Kanta, G. Montavon, M.P. Planche, C. Coddet, “Artificial Neural Networks implementation in plasma spray process : Prediction of power parameters and in-flight particle characteristics vs desired coating structural attributes”, Journal of Surface Coatings Technology, Vol 203, (2009), p. 3361-3369
  • Zhang, A.-F. Kanta, C.-X. Li, C.-J. Li, M.-P. Planche, H. Liao, C. Coddet, “Effect of in-flight particle characteristics on the coating properties of atmospheric plasma sprayed 8 mol% Y2O3-ZrO2 electrolyte coating studying by artificial neural networks, Journal of Surface Coatings Technology, Vol 204, (2009), p.463-469
  • Allimant, M. P. Planche, Y. Bailly, L. Girardot, L. Dembinski, C. Coddet, “Evolution of the particle diameters and particle velocities during a liquid metal atomization”, Journal of Flow Visualization and Image Processing, Vol 16,(3), (2009), p. 237-253
  • P. Planche, H. Liao, G. Montavon, C. Coddet, “ Characterization of the wire arc spray process via image analysis, in-flight particle characteristics and coating properties” Journal of High Temperature Material Processes, Vol 13, (2009), p.1-23
  • Marchand, E. Saoutieff, P. Bertrand, M.P. Planche, O. Tingaud, G . Bertrand, “ Suspension plasma spraying to manufacture electrodes for solid oxide fuel cell (SOFC) and solid oxide electrolysis cell (SOEC)”, ECS Transactions, Vol 25, 2, (2009), p.585-594
  • Marchand, P. Bertrand, J. Mougin, C. Comminges, M.P. Planche, G . Bertrand, “Characterization of suspension plasma-sprayed solid oxide fuel cell electrodes”, Surface and Coatings Technology, Journal of Surface Coatings Technology, Vol 205 (N°4), (2010), p.993-998
  • Khatim, M.P. Planche, L. Dembinski, Y. Bailly, C. Coddet, “Processing parameter effect on the splat diameters of the droplets produced by liquid metal atomization using De Laval nozzle”, Journal of Surface and Coating Technology, Vol 205 (N°4), (2010), p.1171-1175
  • P. Planche, S. Costil, C. Verdy, C. Coddet, “Different processes for different Al2O3 coating properties”, Journal of Applied Physics A: Materials Science and Processing, Vol 99 (N°3), (2010), p.655-671
  • -F. Kanta, M.-P. Planche, G. Montavon, C. Coddet, “In-flight and Upon Impact Particle Characteristics Modelling in Plasma Spray Process”, Journal of Surface and Coatings Technology, Vol. 204 (N° 8-9), (2010), pp. 1542-1548
  • Zhang, F. Sun, L. Zhu，C. Verdy, M. P. Planche ,H. Liao, C. Coddet “Characteristics of Cu film deposited using VLPPS”, Journal of Thermal Spray technology, Vol 20, 1-2,(2011), p.351-357
  • -F. Kanta, G. Montavon, C. Berndt, M.P. Planche, C. Coddet, “Intelligent system for prediction and control: Application in plasma spray process”, Expert Systems with Applications, Volume 38, Issue 1, (2011), p. 260-271
  • Zhu, N. Zhang, F. Sun, R. Bolot, M. P. Planche, H. Liao, C. Coddet, “Thin Yttria-stabilized Zirconia Coatings Deposited by Low Energy Plasma Spraying under Very Low Pressure Condition”, Journal of Thermal Spray Technology, Volume 20 (5), (2011)
  • Suo, X. Guo, W. Li, M. P. Planche, C. Zhang, H. Liao, “Microstructure and wear behavior of SiCp-reinforced magnesium matrix composite by cold spraying”, Advanced Materials Research, 314-316, (2011), p.253-258
  • Zhu, N. Zhang, F. Sun, R. Bolot, M. P. Planche, H. Liao, C. Coddet, “Very Low Pressure Plasma Sprayed Al2O3 and Yttria-Stabilized Zirconia Thin Dense Coatings using a Modified Transferred Arc Plasma Spraying Torch”, Applied Surface Science, Vol 258, 4, (2011), p. 1422-1428
  • Zhu, N. Zhang, R. Bolot, M. P. Planche, H. Liao, C. Coddet, “Very Low Pressure Plasma Sprayed Yttria-Stabilized Zirconia Coating using a Low Energy Plasma Gun”, Applied Physics A, Materials Science & Processing, on line (2011)
  • Zhang, F. Sun, L. Zhu, C.Verdy, M. P. Planche, H. Liao, C. Dong, C. Coddet, “Electron Temperature and Density of the Plasma Measured by Optical Emission Spectroscopy in VLPPS conditions”, Journal of Thermal Spray Technology, Vol 20, 6, (2011), p.1321-1327
  • -F. Kanta, M.-P. Planche, G. Montavon, “Electrochemical characterisations of Al2O3-13%TiO2 coated by atmospheric plasma spray”, Plasma Chemistry and Plasma Processing, Vol. 31, 6, (2011), p. 867-877
  • Marchand, L. Girardot, M.P. Planche, P. Bertrand, Y. Bailly, G. Bertrand “An insight into suspension plasma spray: injection of the suspension and its interaction with the plasma flow”, Journal of Thermal Spray Technology, Vol. 20, 6, (2011), p.1310-1320
  • Suo, X. Guo, W. Li, M. P. Planche, R. Bolot, H. Liao, C. Coddet , “Preparation and characterization of magnesium coating deposited by cold spraying, Journal of Materials Processing Technology, Vol 212, 1, (2012), p.100-105
  • Zhang, F. Sun, L. Zhu，M. P. Planche, H. Liao, C. Dong, C. Coddet, “ Measurement of specific enthalpy under very low pressure conditions”, Journal of Thermal Spray Technology, Vol 21 (3-4) (2012), p.489-195
  • Suo, X. Guo, W. Li, M.P. Planche, H. Liao, “Investigation of deposition behavior of cold-sprayed magnesium coating, Journal of Thermal Spray Technology, Vol. 21, 5, (2012), p.831-837
  • P. Planche, O. Khatim, L. Dembinski, C. Coddet, L. Girardot, Y. Bailly, “Velocities of Copper droplets in de Laval atomization process”, Journal of Powder Technology, Vol 229, (2012), p.191-198
  • X Suo, M. Yu, W Li, M. P. Planche, H. L. Liao, “Effect of Substrate Preheating on Bonding Strength of Cold-Sprayed Mg Coatings”, Journal of Thermal Spray Technology, Vol.21, 5, (2012), p.1091-1098
  • Suo, X. Guo, M.P. Planche, R. Bolot, H. Liao, C. Coddet, “Cold sprayed magnesium coatings deposited with helium and air”, Rare Metals Materials and Engineering, Vol.41, S1, (2012), p.61-63
  • P. Planche, O. Khatim, L. Dembinski, L. Girardot, Y. Bailly, C. Coddet, “Evaluation of the Splats Properties and Relation with Droplets Diameters in Atomization Process Using a De Laval Nozzle”, Material chemistry and physics, Vol 137, 3, (2013), p. 681-688
  • Suo, T. Liu, W. Li, Q. Suo, M. P. Planche, H. Liao, “Numerical study on the effect of nozzle dimension on particle distribution in cold spraying”, Journal of Surface and Coatings Technology, Vol.220, (2013), p. 107-111
  • Liu, M. P. Planche, A. F. Kanta, S. Deng, G. Montavon, K. Deng and Z. M. Ren, “Plasma Spray Process Operating Parameters Optimization Based on Artificial Intelligence”, Journal of Plasma Chemistry Plasma Processing, (2013), (33), p. 1025-1041
  • Zhang, B. He, Z. Zhang, D. Li, M.P.Planche, C. Coddet, “In-flight particle behavior measured by DPV 2000 system under low pressure condition”, Advanced Materials research 690, (2013), 2063-2066
  • Vautherin, M.P. Planche, R. Bolot, A. Quet, L. Bianchi, G. Montavon, “Vapor and Droplets Mixture Deposition of Metallic Coatings by Very Low Pressure Plasma Spraying”, Journal of Thermal Spray Technology, Vol 23 (4) ,(2014) p. 596-608
  • X. Guo, P. Planche, J. Chen, H. Liao “Relationships between in-flight particle characteristics and properties of HVOF sprayed WC-CoCr coatings”, Materials Processing Technology, Vol 214, (2014), p.456-461
  • Suo, Q. Suo, W. Li, M. P. Planche, H. Liao, “Effects of SiC volume fraction and particle size on the deposition behavior and mechanical properties of cold sprayed AZ91D/SiCp composite coatings”, Journal of Thermal Spray Technology, Vol.23 (1-2), (2014), p. 91-97
  • Vautherin, M.-P. Planche, A. Quet, L. Bianchi, G. Montavon, “Manufacturing of composite titanium-titanium nitride coatings by reactive very low pressure plasma spraying (R-VLPPS),” Journal of Physics: Conference Series, 550(1),012035, (2014)
  • Aubignat, M.P. Planche, A. Allimant, D. Billières, L. Girardot, Y. Bailly, G. Montavon, “Effect of suspension characteristics on in-flight particle properties and coating microstructures achieved by suspension plasma spray”, Journal of Physics: Conference Series, 550(1), 12019-12028, (2014)
  • Zhang, H. Li, P. J. He, M.P. Planche, M. G. Olivier, M. Debliquy, H. Liao, “Microstructure and gas sensing properties of solution precursor plasma-sprayed zinc oxide (ZnO) nanostructured coatings” Materials Research Bulletin,63, (2015) 67-71
  • P. Planche, T. Liu, S. Deng, G. Montavon, “Development of an emulator for the plasma process control” Journal of Mechanics Engineering and Automation, 5(1), (2015), 10-18
  • Suo, S. Yin, M. P. Planche, T.Liu, H. Liao, “Strong effect of carrier gas species on particle velocity during cold spray processes”, Journal of Surface and Coatings, 268, (2015) 90-93
  • Liu, S. Deng, M.-P. Planche, G. Montavon, « Estimating the behavior of particles sprayed by a single-cathode plasma torch based on a nonlinear regressive exogenous model”, Surface and Coatings Technology, 268, (2015) 284-292
  • Vautherin, M.-P. Planche, G. Montavon, F. Lapostolle, A. Quet, L. Bianchi “Study of metallic powder behavior in Very Low Pressure Plasma Spraying (VLPPS) – Application to the manufacturing of titanium-aluminum coatings, Journal of Surface and Coatings, 275, (2015) 341-348
  • Aubignat, M. P. Planche, D. Billieres, A. Allimant, Optimization of the injection with a twin-fluid atomizer for suspension plasma spray process using three non-intrusive diagnostic tools, Journal of Visualization, 19(1), (2016), 21-36
  • Feng, M.P. Planche, S. Deng, H. Liao, H. Rabat, D.Hong “Study of the particle behavior in a pulsed arc”, Journal of Surface and Coatings, 287, (2016), 113-118
  • Huang, W. Li, Z. Zhang, M. Fu, M. P. Planche, H. Liao, G. Montavon, "Modification of a cold sprayed SiCp/Al5056 composite coating by friction stir processing”, Journal of Surface and Coatings, 296, (2016), 69-75
  • Chen, Y. Xie, S. Yin, M.P. Planche, S. Deng, R. Lupoi, H. Liao “Evaluation of the interfacial bonding between particles and substrate in angular cold spray” Materials Letters, 173, (2016), 76-79
  • Liu, R. Bolot, S. Costil, M.P. Planche, “Transient thermal and mechanical analysis of NiCrBSi coatings manufactured by hybrid plasma spray process with in-situ laser remelting”, Journal of Surface and Coatings, 292, (2016), 132-143
  • Xie, M.P. Planche, R. Raoelisson, H.Liao, X. Suo, P.Hervé, “Effect of Substrate Preheating on Adhesive Strength of SS 316L Cold Spray Coatings, ”, Journal of Thermal Spray Technology, Vol.25, 1, (2016), 123-130
  • Raoelison, E. Aubignat, M.P. Planche, S. Costil, C. Langlade, H. Liao “Low pressure cold spraying under 6 bar pressure deposition: exploration of high deposition efficiency solutions using a mathematical modelling”, Journal of Surface and Coatings, 302, (2016), 47-55
  • Xie, S. Yin, C. Chen, M.P Planche, H. Liao, R. Lupoi, “New insights into the coating/substrate interfacial bonding mechanism in cold spray”, Scripta Materalia, 125, (2016), 1-4
  • Wang, J. Liu, N. Kan, G. Darut, T. Poirier, J. Stella, H. liao, M. P. Planche, “Cavitation erosion of plasma-sprayed CoMoCrSi coatings”, Journal of Tribology International, 102, (2016), 429-435
  • Xie, M. P. Planche, R. Raoelison, P. Hervé, X. Suo, P. He, H. Liao, “Investigation on the influence of particle preheating temperature on bonding of cold-sprayed nickel coatings”, Journal of Surface and Coating Technology, 318 (2017), 99-105
  • Huang, W. Li, Y. Xie, M. P. Planche, H. Liao, G. Montavon, “Effect of Substrate Type on Deposition Behavior and Wear Performance of Ni-Coated Graphite/Al Composite Coatings Deposited by Cold Spraying”, Journal of Materials Science and Technology, 33, (2017), 338-346
  • Huang, W. Li, Z. Zhang, M. P. Planche, H. Liao, G. Montavon, “Effect of Tool Rotation Speed on Microstructure and Microhardness of Friction-Stir-Processed Cold-Sprayed SiCp/Al5056 Composite Coating”, Journal of Thermal Spray Technology, 25(7), (2016), 1357-1364
  • Wang, J. Liu, H. Liao, G. Darut, J. Stella, T. Poirier, M.P. Planche, “Influence of preheating processes on the microstructure of laser glazed YSZ coatings”, Journal of Ceramics International, 43(5), (2017), 4606-4611
  • Wang, J. Stella, G. Darut, T. Poirier, H. Liao, M. P. Planche, “APS prepared NiCrBSi-YSZ composite coatings for protection against cavitation erosion“ Journal of alloys and compounds, 699, (2017), 1095-1103
  • Zhang, D. Lin, Y. Li; M. P. Planche, H. Liao, C. coddet, F. Dong, “In-flight particle characterization and coating formation under low pressure plasma spray condition“, Journal of iron and steel research international, 24(3), (2017), 306-312
  • Huang, W. Li, Y. Feng, Y. Xie, M. P. Planche, H. Liao, G. Montavon, “Microstructural evolution and mechanical properties enhancement of a cold-sprayed Cu-Zn alloy coating with friction stir processing“, Journal of Materials characterization, 125, (2017), 76-82
  • Wang, J. Liu, H. Liao, G. Darut, J. Stella, T. Poirier, M.P. Planche, “Influence of Laser Glazing on the Characterization of Plasma-Sprayed YSZ Coatings“, Journal of Thermal spray technology, 26(1-2), (2017), 93-99
  • Feng, M. P. Planche, H.,Liao, C.,Verdy, F.,Bernard, “Microstructure and electric properties of low-pressure plasma sprayed β-FeSi2 based coatings“, Journal of Surface and Coatings Technology, 318, (2017), 3-10
  • Xie, M. P. Planche, R. Raoelisson, P.Herve, X. Suo, P. He, H. Liao, “Investigation on the influence of particle preheating temperature on bonding of cold-sprayed nickel coatings“, Journal of Surface and Coatings Technology, 318, (2017), 99-105
  • Huang, W.,Li, M. P. Planche, H.,Liao, G.,Montavon, “In-situ formation of Ni-Al intermetallics-coated graphite/Al composite in a cold-sprayed coating and its high temperature tribological behaviors“, Journal of Materials Science and Technology, 33, (2017), 507-515
  • Wang, G. Darut, T. Poirier, J. Stella, H. Liao, M.P. Planche, “Cavitation erosion of plasma sprayed YSZ coatings produced by feedstocks with different initial sizes“, Tribology International, 111, (2017), 226-233
  • Wang, G. Darut, T, Poirier, J. Stella, H. Liao, M.P.,Planche, “Ultrasonic cavitation erosion of as-sprayed and laser-remelted yttria stabilized zirconia coatings“, Journal of the European Ceramic Society, 37, (2017), 3623-3630
  • Fan, G. Darut, M. P. Planche, N. Kang, H ; Liao, G. Montavon, “Formation mechanisms of in-situ Al based intermetallic coatings manufactured by very low pressure plasma spraying”, Journal of Surface and Coatings Technology, 334, (2018), 300-304
  • Raoelison, Y. Xie, T. Sapanathan, M. P. Planche, R. Kromer, S. Costil, C. Langlade, “Cold gas dynamic spray technology: a comprehensive review of processing conditions for various technological developments till to date”, Additive Manufacturing, 19 (2018), 134-159
  • Zhao, F. Peyraut, M.P. Planche, J. Ilavsky, H. Liao, A. Lasalle, A. Allimant, G. Montavon, Experiments, statistical analysis and modeling to evaluate the porosity influence in SPS coatings, Journal of thermal spray technology, 2018.
  • Zhao,Y. Wang, Z. Yu, M.P. Planche, F. Peyraut, H. Liao, A. Lasalle, A. Allimant, G. Montavon, Microstructural, mechanical and tribological properties of suspension plasma sprayed YSZ/h-BN composite coating, Journal of the European Ceramic Society, 2018. 38: P. 4512–4522.
  • Zhao, Z.Yu, M.P. Planche, A. Lasalle, A. Allimant, G. Montavon, H. Liao, Influence of Substrate Properties on the Formation of Suspension Plasma Sprayed Coatings, Journal of thermal spray technology, 2018. 27(1): p. 73-83.
  • Huang, X. Yan, W. Li, W.B. Wang, C. Verdy, M.P. Planche, H.L. Liao, G. Montavon, Post-spray modification of cold-sprayed Ni-Ti coatings by high-temperature vacuum annealing and friction stir processing, Applied Surface Science 451, (2018) 56-66
  • Chen, Xinliang Xie,Y. Xie, M.P. Planche, S. Deng, G. Ji, E. Aubry, Z. Ren, H. Liao, Cold spraying of thermally softened Ni-coated FeSiAl composite powder: Microstructure characterization, tribological performance and magnetic property, Materials and Design 160, (2018) 270-283
  • Xie, C.,Chen, M. P. Planche, S.,Deng, H.,Liao, Effect of spray angle on Ni particle deposition behaviour in cold spray, Journal of Surface Engineering, Surface Engineering 34 (5), 352-360 (2018)
  • Huang, K.Yang, N.Li, W.Li, M.P.Planche, C.Verdy, H.Liao, G. Montavon, Microstructures and wear-corrosion performance of vacuum plasma sprayed and cold gas dynamic sprayed Muntz alloy coatings, Journal of Surface and Coatings Technologym in press (2019)
  • Wang, Y. Zhao, G.Darut, T. Poirier, J.Stella, K. Wang,; H. Liao; M.P. Planche, A novel structured suspension plasma sprayed YSZ-PTFE composite coating with tribological performance improvement, Surface and Coatings Technology, 358, 108-113 (2019)
  • Zhao, F. Peyraut, M.P. Planche, J. Illavsky, A. Lasalle, A. Allimant, G. Montavon. Experiments, Statistical Analysis, and Modeling to Evaluate the Porosity Influence in SPS Coatings, Journal of Thermal Spray Technology 28 (Issue 1–2), 76–86 (2019)
  • Fan, G. Darut, M.P Planche, H. Liao, G. Montavon, Characterizations of Composite Titanium Nitride Coatings Deposited by Very Low-Pressure Plasma Spraying, Journal of Thermal Spray Technology 28 (Issue 1–2) 265–272 (2019)
  • Darut, A. Niederhauser, B. Jaccoud, M.P Planche, H Liao, G. Montavon, VLPPS: An Emerging Process to Create Well-Defined Components by Additive Manufacturing, Journal of Thermal Spray Technology 28 (Issue 1–2), 255–26 (2019)
0    
enseignements:
Type de formation Discipline enseignée Département Niveau Nature Responsable Unité de Valeur
                                  Formation initiale Optique Tronc commun 1ère et 2ème année post bac TD, TP TICE
Thermodynamique Tronc commun 1ère et 2ème année post bac C, TD De 1999 à 2005
Mécanique du point et énergétique Tronc commun 1ère et 2ème année post bac C, TD, TP De 2002 à 2007
Electricité Tronc commun 1ère et 2ème année post bac TD
Mécanique du solide et thermodynamique Tronc commun 2ème année post bac C, TD Depuis 2010
Accompagnement à la conduite d’un raisonnement physique Tronc commun 1ère et 2ème année post bac TD
Electrostatique Génie Mécanique et Conception L (1ère année cycle ingénieur) C, TD De 2004 à 2010
Physique des transferts de chaleur Ergonomie, Design et Conception Mécanique L (1ère année cycle ingénieur) C, TD Depuis 2012
Acoustique et mécanique vibratoire Ergonomie, Design et Conception Mécanique L (1ère année cycle ingénieur) C, Td
Dimensionnement des machines Ergonomie, Design et Conception Mécanique M (3ème année cycle ingénieur) C, TD
Encadrements stages d’ingénieurs et de fin d’étude Génie Mécanique et Conception En raison de 5 à 8 étudiants par année
Formation par alternance Thermique-Thermodynamique Génie Mécanique et Conception L (1ère année cycle ingénieur) C, TD Depuis sa création en 2013
      Formation continue Stage industriel en Projection thermique Laboratoire LERMPS Effets des principaux paramètres de projection Interactions environnement et particules en vol Techniques et systèmes de collecte des gaz, des particules et des fumées Contrôles et diagnostic avant et pendant la projection
Fontanet Génie Mécanique et Conception Intervention pour du soutien en physique depuis 2015
Validation des Acquis d’Expériences Génie Mécanique et Conception Audition de recevabilité de 4 candidats Correction des mémoires (en cours)
administration:
Mandats
  • Conseil Administratif de l’UTBM, juin 2016, membre titulaire
  • Conseil Scientifique de l’UTBM (2012-2016), membre titulaire
  • Bureau de Département Génie Mécanique et Conception de l’UTBM (2003-2012), membre titulaire
  • Conseil d’Unité du laboratoire LERMPS (depuis juin 2013), membre titulaire
  • Commission Consultative Paritaire de l’UTBM (2009), membre suppléante
  • Conseil National des Universités (62ème section) (2015), membre titulaire
  • Association Arc Electrique depuis septembre (depuis 2009), membre cooptée et membre du comité scientifique
  • Comité de pilotage du Réseau CNRS « Plasmas Froids » (2006 - 2012), membre titulaire
  • GdR Abioplas (renouvelé en 2014) sur les applications plasma dans le domaine du biomédical (depuis 2011), membre cooptée
  • Directrice du pôle Mobilités et Transports du Futur
  • Coordinatrice des activités de l'UTSEUS (Université de Technologie à Shanghai) pour l'UTBM.
switch:
0
kc_data:
a:8:{i:0;s:0:"";s:4:"mode";s:0:"";s:3:"css";s:0:"";s:9:"max_width";s:0:"";s:7:"classes";s:0:"";s:9:"thumbnail";s:0:"";s:9:"collapsed";s:0:"";s:9:"optimized";s:0:"";}
kc_raw_content:

Log In

Create an account